dc.contributor.authorFoo, Fang Ren
dc.date.accessioned2017-05-09T08:36:08Z
dc.date.available2017-05-09T08:36:08Z
dc.date.issued2017-05-09
dc.identifier.urihttp://hdl.handle.net/10356/70733
dc.description.abstractFor this project, the objective is to design and build a switching inverting regulator, using MC 34063A microchip. With further advances in technology, the demand for power is increasing. A significant portion of the demand comes from electronic devices, which requires specific input parameters to operate properly. Therefore, there is a need for properly designed regulators. The MC 34063A integrated circuit (IC) is a very versatile specimen, therefore it is being widely used. Depending on the different applications, with an external circuit connection, the MC 34063A can become a boost (step-up), buck (step-down) or buck-boost (inverting) regulator. The desired output is a -12V DC current which can supply a 200mA load with a 5V ± 5% input voltage. Results of the experiments were recorded, analysed and compared with theoretical predictions. Different input values are also tested to examine the effect of the loads on the switching inverting regulator. With the help from this report and other similar reports, the three regulator configurations can be designed and built onto a single board which can be toggled by adjusting a switch. The efficiency of the regulator can also be further improved.en_US
dc.format.extent42 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen_US
dc.titleDesign and build an inverting switching regulatoren_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorLim Yong Ching (EEE)en_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeELECTRICAL and ELECTRONIC ENGINEERINGen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record