dc.contributor.authorZheng, Shuangyue
dc.date.accessioned2016-05-19T04:09:04Z
dc.date.available2016-05-19T04:09:04Z
dc.date.issued2016
dc.identifier.urihttp://hdl.handle.net/10356/67682
dc.description.abstractLeakage on the pipe is a problem in natural gas transmission system. The tem- perature at leakage point drops due to Joule-Thomson effect. The material of gas pipe was iron which has a good conductivity led to temperature dropping to 1 to 2 cm far away from the leakage point. Instead of traditional way to monitor the temperature change by thermocouple, digital temperature sensor DS18B20 was used to check the its performance and help to collect temperature information when the leakage occurred on the pipe. The collected results shows that the size of the leakage affected the temperature dropping at the center of the leakage point and the range. By comparing the experimental results and simulations results, it shows that the experimental setup was not as expected.en_US
dc.format.extent55 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineeringen_US
dc.titleDesign and development real-time multi-point temperature sensing system based on microcontrolleren_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorSo Ping Lamen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record