dc.contributor.authorLim, Jian Li.
dc.date.accessioned2011-06-15T06:54:14Z
dc.date.available2011-06-15T06:54:14Z
dc.date.copyright2011en_US
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/10356/45599
dc.description.abstractSplit Hopkinson Pressure Bar (SHPB) has become a frequently used technique for measuring compressive stress-strain relationship of various material and its alloys under high strain rate. In this report, a finite element simulation of a Split Hopkinson Bar is build to analyse the effect of varying specimen diameter and striker bar‟s initial velocity on the behaviour of the material. ANSYS Workbench coupled with LS-DYNA solver is use to simulate and produce the stress strain results. Specimen made of Aluminium alloy AL6061-T6 with length 5mm and varying diameter of 5, 8 and 10mm are used in this project for simulation test. Striker bar‟s velocities of 6m/s, 12m/s 15m/s and 17m/s are varied in this project to obtain simulation results. Stress vs time, stain vs time, strain rate vs time and stress vs strain relationships are covered in this project. In general, higher stress and strain are observed for simulation with smaller specimen diameter and higher striker bar‟s velocity. With careful selection, smaller diameters can be used successfully to achieve high strain rates.en_US
dc.format.extent71 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Mechanical engineering::Mechanics and dynamicsen_US
dc.titleSimulation of high strain rate behaviour of aluminium alloy AL6061-T6 under dynamic compression loadingen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorShu Dong Weien_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeMECHANICAL ENGINEERINGen_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record