dc.contributor.authorChen, Lixin
dc.date.accessioned2011-06-10T03:58:34Z
dc.date.available2011-06-10T03:58:34Z
dc.date.copyright2011en_US
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/10356/45242
dc.description.abstractMicro-machining has become one of the most successful and latest developments in precision engineering. There are many types of micro-machining in the manufacturing industries, and the main focus in this project will be on micro-turning. During machining operation, heat and friction often generate between tools and chip in the cutting area, resulting in poor machining performance. Micro-machining operation is thus often more efficient with the use of lubrication or coolant. However, in the machining industries, coolants and lubricants are used in high quantities to reduce the temperature & friction at the cutting area. As a result, coolant in wet machining operations is a crucial economic issue. Therefore the interest has been switch to another alternative, machining with Minimum Quantity Lubricant (MQL), is gaining acceptance as a cost-saving and environmentally friendly option in place of some wet machining processes. Minimum Quantity Lubricant is actually a misnomer, as it does not refer to an optimal minimal quantity of lubricant. This is a standard term applied to low lubrication flow rate where almost 80% of benefit of flooded lubricant condition may be achieved. Under such condition the flow rate of lubricant is usually kept at few millimeters per hour rather than few liters per hour. This report presents a total of 48 micro-turning cutting operations based on Design of Experiment (DOE) methodology, conducted on 6 sets of wet cutting operation and 2 sets of dry condition cutting operation. The machining parameters varied in these experiments are the spindle velocity, feed rate and depth of cut. The aim of this experiment is to investigate the effect of Minimum Quantity Lubricant (MQL) on surface quality and the cutting forces, and predicting the optimum value for surface ii quality using machining parameters and amount of Minimum Quantity Lubricant (MQL).en_US
dc.format.extent72 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Mechanical engineering::Machine shop and drawingsen_US
dc.titleEffect of minimum quantity lubrication during micro-machiningen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeMECHANICAL ENGINEERINGen_US
dc.contributor.researchPrecision Engineering and Nanotechnology Centreen_US
dc.contributor.supervisor2Jaspreet Singh Dhupiaen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record