dc.contributor.authorOng, Kai Yie.
dc.date.accessioned2010-04-22T03:42:55Z
dc.date.available2010-04-22T03:42:55Z
dc.date.copyright2010en_US
dc.date.issued2010
dc.identifier.urihttp://hdl.handle.net/10356/35653
dc.description.abstractVarious attempts, such as varying the thickness and phosphorus content, have been made to slow down the consumption of UBM and formation of IMC. The current project chooses to focus on Ni-Sn-P UBM alloy. There is not much literature concerning Ni-Sn-P UBM alloy therefore more efforts have to be made to examine the interfacial reactions, the mechanical reliability and the effect of tin concentration on reliability of electroless Ni-Sn-P with the solder. Samples were reflowed for 1, 3 and 5 cycles for 60 seconds at 260 °C and tensile test is performed to test the mechanical reliability of the joint. 2 layers of IMC are formed on electroless Ni-Sn-P layer and they are Ni3Sn4 and a compound with the following composition, Ni 70.66at% Sn 1.54at% P 27.80at%. Cross section of solder joints for electroless Ni-Sn-P with high tin shows thick layer of Ni3Sn4 and layers with compositions comprising of Ni 61.28at%, Sn 20.42at%, P 18.30at% and Ni 72.93at% and Sn 13.29at%, P 13.78at% respectively. All electroless Ni-P samples showed ductile failure in all the solder. Both electroless Ni-Sn-P samples with low tin and high tin which had undergone 1 cycle of reflow experiences ductile failure in the solder joint whereas samples that had undergone 3 cycles and 5 cycles of reflow both experiences bulk and interfacial failure. Tensile strength for samples with 5 cycles of reflow have lower strength than those with 3 cycles of reflow.en_US
dc.format.extent46 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Materials::Microelectronics and semiconductor materials::Nanoelectronics and interconnects en_US
dc.titleCharacterization of solder/UBM interface and materials propertiesen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorChen Zhongen_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.description.degreeBachelor of Engineering (Materials Engineering)en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record