dc.contributor.authorChew, Chee Ho.
dc.date.accessioned2009-05-29T06:45:48Z
dc.date.available2009-05-29T06:45:48Z
dc.date.copyright2009en_US
dc.date.issued2009
dc.identifier.urihttp://hdl.handle.net/10356/17081
dc.description.abstractCable driven system is one of the most potential manipulator system used to fulfill the industrial area which cannot completed by conventional robot system. The working principle of cable driven system is controlling the end effector by servo motor through the cable. Hence, cable driven system able to provide function of high load capacity and large workspace simultaneously. The main objective of this project is to investigate the motion control of the servo motor in order to overcome the vertical load which connected by cable. Due to the main focus is vertical motion, experiment setup was modified to provide enough support for the system and sufficient vertical height to perform the testing. Subsequently, electronic hardware wiring was connected and setting of the hardware is preset to fit the condition of the experiment. After the setup of the hardware, the software was start developed. Research was done to find out the suitable idea to build up the concept for the software. Consequently, the concept of the software was implemented into Labview step by step. The software developed in closed loop system with PID control loop. Besides that the software also equipped trajectory generation function and data recording ability. The developed software served the program to control the motion of the dc servo motor. Experiments were then conducted by controlling the motor in Voltage mode for upward and downward motion. The relationship between voltage provided, current drawn by the motor, angular velocity and torque generated by the motor is observed and analyzed. Besides that, the factor of gravitational force also included in the experiment and the gravitational force effect is explained.en_US
dc.format.extent129 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Mechanical engineering::Mechanics and dynamicsen_US
dc.titleDevelopment and control of servomotor of software for vertical motionen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorLau Wai Shing, Michaelen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US


Files in this item

Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record